Red Wire Technologies

User Tools

Site Tools

Trace: • oxygen_getting_started
advancedoperations

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
advancedoperations [2023/07/26 09:45] – ↷ Page name changed from advancedopertions to advancedoperations jambroseadvancedoperations [2024/06/17 21:21] (current) – tflynn
Line 1: Line 1:
 +====== Oxygen SDR Advanced Users' Guide ======
 +
 ===== FPGA ===== ===== FPGA =====
  
Line 44: Line 46:
  
 =====GPIO Port Access===== =====GPIO Port Access=====
 +
 +More information for the GPIO pinout for Oxygen can be found [[oxygen:oxygenspecs#gpio_port_pinout|here]].
  
 =====Console Port Access===== =====Console Port Access=====
 The console port is located under the metal cover near the "GPS" port on top of the RWT Oxygen SDR. The console port can be accessed using an external USB to UART device. A detailed process for accessing the console port is [[oxygen:consoleport|here]].   The console port is located under the metal cover near the "GPS" port on top of the RWT Oxygen SDR. The console port can be accessed using an external USB to UART device. A detailed process for accessing the console port is [[oxygen:consoleport|here]].  
 +
 +
 +=====Dual Role USBC Port Control=====
 +
 +Users can control the mode of the USBC dual role port by using the utility provided from RWT, usbc_helper.  For help with the utility enter the command:
 +
 +    root@carbon:~# usbc_helper -h
 +    
 +To switch to host mode enter the command:
 +
 +    root@carbon:~# usbc_helper -m host
 +    
 +To switch to device mode the command:
 +    
 +    root@carbon:~# usbc_helper -m device
 +
advancedoperations.1690382752.txt.gz · Last modified: 2023/07/26 09:45 by jambrose