Differences

This shows you the differences between two versions of the page.

--- customlinux [2023/04/06 09:56] – [Building Complete Custom Images] admin
+++ customlinux [2024/04/25 07:10] (current) – [Using the SDK] tflynn
@@ Line 1: / Line 1: @@
 ====Build System====
-RWT uses the [[https://www.openembedded.org/wiki/Main_Page|Openembedd]]/[[https://www.yoctoproject.org/|Yocto]] build system to develop a custom Linux distribution for each radio and specific mission application.  Each radio is shipped with a microSD card with a pre-installed Linux operating system.
+RWT uses the [[https://www.openembedded.org/wiki/Main_Page|Openembedd]]/[[https://www.yoctoproject.org/|Yocto]] build system to develop a custom Linux distribution for each radio and specific mission application.  Each radio is shipped with a microSD card with a pre-installed Linux operating system.  The custom Linux distribution distributed with RWT SDRs is a development environment suitable for a non internet connected test and development device.  Rebuilding the distribution for a final product is highly recommended.  This would include removing any extra packages,adding in common security settings like a root password, proper user creation, limiting debugfs access etc is strongly recommended.
+----
 ====Getting Started with OpenEmbedded/Yocto====
-For new users this is an advanced topic.  RWT strongly recommends reading through the documentation provided by the [[https://docs.yoctoproject.org/|Yocto Project]] .  This wiki is not a detailed explanation of how to use OpenEmbedded/Yocto, it will provide examples
+For new users this is an advanced topic.  RWT strongly recommends reading through the documentation provided by the [[https://docs.yoctoproject.org/|Yocto Project]] .  This wiki is not a detailed explanation of how to use OpenEmbedded/Yocto, the existing documentation is extensive.
+----
 ====Using the SDK =====
-RWT provides an ESDK
+RWT plans to provide an SDK in the near future which will allow code development without building a full image and SDK.
+----
 ====Building Complete Custom Images====
-Currently RWT uses the dunfell branch of Openembedded/Yocto for development of the custom Linux distribution. All modified recipes that RWT uses are in the RWT [[https://github.com/redwiretechnologies|github repository]].  The starting point is the build-oxygen repository, it contains links to the correct version of the repositories.
+Currently RWT uses the kirkstone release of Openembedded/Yocto for development of the custom Linux distribution. All modified recipes that RWT uses are in the RWT [[https://github.com/redwiretechnologies|github repository]].
+ The starting point for the RWT Oxygen Development SDR is the [[https://github.com/redwiretechnologies/build-oxygen|build-oxygen]] repository, it contains git sub-modules to the correct version of the repositories to start building from.  There is a Readme with basic instructions on how to get started.
+For the Carbon SDR with a FPGA larger than the ZCU3EG the starting point is the repository [[https://github.com/redwiretechnologies/carbon808-build|carbon-build]], it contains git sub-modules to the correct version of the repositories to start building from.. There is a Readme with basic instructions on how to get started.