Differences

This shows you the differences between two versions of the page.

--- oxygen:about [2022/08/24 19:05] – [General Description] gflynn
+++ oxygen:about [2024/08/20 14:25] (current) – kclark
@@ Line 1: / Line 1: @@
-======Oxygen SDR======
+======Oxygen SDR - General Description======
+**Access the RWT online shop: [[https://redwiretechnologies.us/products/]]**
+**[[oxygen:oxygen_getting_started|  Oxygen - Getting Started - step by step instructions]]**
 {{ :img_5557.jpg?nolink&550 |}}
 \\
@@ Line 24: / Line 29: @@
  ]]
-  * For advanced information on building a [[customlinux|custom Linux distribution]]
+  * For advanced information on custom Linux distributions see: [[:customlinux|Building a Custom Linux Distribution]]
   * For information on specifications see: [[oxygenspecs|Oxygen Specifications]]
+  * For information on creating a sdcard see: [[:sdcardcreation|SD card creation]]
+  * For information on the console port see: [[oxygen:consoleport|Console Port]]
+  * For information on GPIO see: [[oxygen:oxygenspecs#gpio_port_pinout|GPIO Port Pinout]]
+  * For information on FPGA images see: [[:advancedoperations#fpga|FPGA]]
 \\
@@ Line 37: / Line 50: @@
 |  ***3EG**  |  **XCZU3EG-1SFVC784**  |  **Quad (1.5GHz)**  |  **Y**  |  **-**  |  **154k**  |  **360**  |  **7.6Mb**  | |
 |  4EV  |  XCZU4EV-1SFVC784  |  Quad (1.5GHz)  |  Y  |  Y  |  192k  |  728  |  4.5Mb  |  13.5Mb  |
-|  5EV  |  XCZU5EV-1SFVC784  |  Quad (1.5GHz)  |  Y  |  Y  |  256k  |  1,248  |  5.1Mb  |  18Mb  |
 <sup>***Standard configuration ships with the 3EG option. All FPGAs have 2GB DDR4 RAM and 128 MB SPI Flash**</sup>
 \\
@@ Line 43: / Line 55: @@
 \\
 ====FPGA Utilization====
-An HDL development environment has been created that is similar to a GNU Radio out-of-tree module to allow some or all of the user signal processing algorithms to be implemented in the logic fabric.  This results in a significant performance boost and more deterministic timing for applications such as CDMA and TDMA waveforms. Rather the radio is used as an iio device or a standalone embedded system using gr-rwt, there is ample remaining FPGA space for user code development.
+An HDL development environment has been created that is similar to a GNU Radio out-of-tree module to allow some or all of the user signal processing algorithms to be implemented in the logic fabric.  This results in a significant performance boost and more deterministic timing for applications such as CDMA and TDMA waveforms. Whether the radio is used as an iio device or a standalone embedded system using gr-rwt, there is ample remaining FPGA space for user code development.
 {{ oxygen:oxygenfpgausage.png?nolink& |}}
 \\
@@ Line 56: / Line 68: @@
   - GPIO port cable (Molex part number 0151341402)
   - 32 GB microSD card, preloaded with boot image and example code
+  - Console/Debug port header extension connector (Samtec ESQ-106-44-L-D)
 \\
 {{ oxygen:oxygenincase.jpg?nolink&450 |}}
@@ Line 61: / Line 74: @@
 {{ oxygen:oxygenparts2.jpg?nolink&450 |}}
 \\
-In addition to the standard configuration, the Oxygen SDR can be order without an enclosure.
+In addition to the standard configuration, the Oxygen SDR can be ordered without an enclosure.
 \\
 \\
 {{ oxygen:img_6250.jpg?nolink&450 |}}