Differences

This shows you the differences between two versions of the page.

--- oxygen:consoleport [2022/09/29 10:02] – [Serial UART Connections] tcarpenter
+++ oxygen:consoleport [2022/09/29 10:08] (current) – [Connecting a SparkFun Serial Basic Breakout –CH340C and USB-C, DEV-15096] tcarpenter
@@ Line 37: / Line 37: @@
-Oxygen Pin 1 – Oxygen Ground to Adapter Ground
+  * Oxygen Pin 1 – Oxygen Ground to Adapter Ground
-Oxygen Pin 3 – Oxygen TX Output to Adapter RX Input
+  * Oxygen Pin 3 – Oxygen TX Output to Adapter RX Input
-Oxygen Pin 5 – No connection, skip it
+  * Oxygen Pin 5 – No connection, skip it
-Oxygen Pin 7 – Oxygen RX Input to Adapter TX Output
+  * Oxygen Pin 7 – Oxygen RX Input to Adapter TX Output
 {{ oxygen:oxygenhookupwithusbmicromodule.jpg?nolink&400 |}}
@@ Line 53: / Line 53: @@
 This module provides serial to USB 2.0 conversion utilizing a USB-C port to connect the Oxygen unit boot terminal to a host computer. Connections are as follows:
-Oxygen Pin 1 – Oxygen Ground to Adapter Ground
+  * Oxygen Pin 1 – Oxygen Ground to Adapter Ground
-Oxygen Pin 3 – Oxygen TX Output to Adapter RX Input
+  * Oxygen Pin 3 – Oxygen TX Output to Adapter RX Input
-Oxygen Pin 5 – No connection, skip it
+  * Oxygen Pin 5 – No connection, skip it
-Oxygen Pin 7 – Oxygen RX Input to Adapter TX Output
+  * Oxygen Pin 7 – Oxygen RX Input to Adapter TX Output
 {{ oxygen:oxygenhookupwithusbcmodule.jpg?nolink&400 |}}